亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

punch machine hydraulic cylinder Sold to El Salvador

Release time:2023-11-23 08:22:30 Hits: Current position: Home > News

This article mainly introduces:

El Salvador hydraulic cylinder,punch machine hydraulic cylinder manufacturer,punch machine hydraulic cylinder

El Salvador punch machine hydraulic cylinder

(El Salvador punch machine hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd)

punch machine hydraulic cylinder are widely used in El Salvador,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed punch machine hydraulic cylinder for customers from El Salvador.

Introduction to punch machine hydraulic cylinder:

The punch machine hydraulic cylinder is mainly composed of body, piston, piston rod, punch machine hydraulic cylinder head, punch machine hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the punch machine hydraulic cylinder into two chambers, and moves reciprocally in the punch machine hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the punch machine hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the punch machine hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the punch machine hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the punch machine hydraulic cylinder bottom and the punch machine hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the punch machine hydraulic cylinder The working medium of the punch machine hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; punch machine hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the punch machine hydraulic cylinder: The buffer structure of the punch machine hydraulic cylinder is to prevent the piston from colliding with the punch machine hydraulic cylinder head at the end of the stroke.

punch machine hydraulic cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

When installing the punch machine hydraulic cylinder pipe, the pipe should be cleaned after installation, and should not pass through the punch machine hydraulic cylinder block, and the by-pass pipe must be installed in front of the oil port of the punch machine hydraulic cylinder block. This is important. Otherwise, the foreign body in the pipeline will enter the punch machine hydraulic cylinder, and once it enters, it is difficult to exclude it, but it becomes a foreign body transported to the punch machine hydraulic cylinder. Moreover, when cleaning, the removal method of foreign bodies entered in the installation pipeline operation should be considered. In addition, the corrosion in the pipe should be pickling and other procedures before the pipe installation, and the rust must be completely removed.

The body of the punch machine hydraulic cylinder on the processing process requirements: the body of the punch machine hydraulic cylinder is an important and essential part of the punch machine hydraulic cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the punch machine hydraulic cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

Answers to some questions about punch machine hydraulic cylinder:

How to judge the failure of forklift hydraulic cylinder?
The common faults of the hydraulic cylinder of forklift truck are mainly crawling, insufficient thrust, working speed decline or even stop. Generally, crawling occurs at low speed. The main reason is that the air stored in the cylinder is not cleared. In addition, excessive or uneven mechanical friction can also cause crawling. Such as the piston and the piston rod different heart, the piston rod full length or local bending, the cylinder hole straightness is poor, the cylinder is drum shaped or has a large taper, the cylinder thin finish decline or produce hair, the cylinder installation accuracy is out of whack, the piston rod nuts at both ends of the screw too tight to make its concentricity is poor, the oil seal screw too tight friction is too large, will cause crawling.

PLC+ inverter + motor + pump + solenoid valve + cylinder combination, can control the accuracy of cylinder position?
In the case of extremely high accuracy requirements, you can not, please consider a few problems: 1, hydraulic oil can be compressed, it is elastic like a spring. Therefore, in the general hydraulic servo system, the valve control is far more accurate than the pump control. Because the valve can be installed very close to the hydraulic cylinder, or even installed on the hydraulic cylinder, but the pump must go through the tubing and then into the hydraulic cylinder, there is a long distance, which greatly reduces the rigidity of the system and increases the difficulty of control. 2, the quantitative pump is first of all leaking, and there is 10%-20% flow pulsation. Secondly, and more unfortunately, the leakage of the pump is related to the pressure and is non-linear.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
亚洲一区二区三区中文字幕手机在线| 久久久久久精品免费看| 亚洲国产精品午夜福利久久| 国产日韩欧美中文字幕在线| 日韩在线观看一卡二卡| 亚洲另类欧美在线中文字幕不卡| 亚洲中文字幕在线视频一区| 亚洲综合精品欧美日韩一区二区三区91| 国产精品亚洲А∨天堂网不卡| 日韩精品欧美亚洲国产最大| 精品国产片亚洲一区| 国产精品日本一区二区在线看| 亚洲中文字幕在线视频一区| 欧美午夜激情久久久久| 午夜无码精品一区二区三区| 国产麻豆精品福利在线观看| 久久久久久久久久久午夜福利| 亚洲av熟女少妇一区二区三区| av网址在线播放大全| 国产精品久久久久粉嫩小| 国产三级视频在线观看网站| 五月婷婷深开心五月| 国产三级黄色片观看| 国产一级二级三级在线观看| 93国产精品久久久久久| 国产激情老熟女一区二区| 接下来开始上伦理课免费观看| 日韩一区二区合集影院在线观看| 少妇人妻偷人精品无码视频| 中文字幕精品资源站| 免费看中文字幕一级高清| 欧美亚洲专区一区二区| 久久精品国产亚洲高清| 9久久99久久久免费精品然| 日韩欧美精品中文字幕一区| 国产日韩欧美中文字幕在线| 日本精品va在线观看| 精品视频一区二区三区美女视频| 亚洲欧美都市校园另类| 国产又粗又长又硬又黄网站| 国产亚洲一区二区三区午夜|