亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

stacker cylinder Sold to Republic of Lithuania

Release time:2023-11-12 14:24:19 Hits:109 Current position: Home > News

This article mainly introduces:

Republic of Lithuania hydraulic cylinder,stacker cylinder manufacturer,stacker cylinder

Republic of Lithuania stacker cylinder

(Republic of Lithuania stacker cylinder,produced by Hebei Hengyu company)

stacker cylinder are widely used in Republic of Lithuania,because of no transmission clearance,powerful torque,clever hydraulic energy conversion.So our company has designed stacker cylinder for customers from Republic of Lithuania.

Introduction to stacker cylinder:

The stacker cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the stacker cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The stacker cylinder is basically composed of stacker cylinder and stacker cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

stacker cylinder hydraulic oil selection: The recommended working oil viscosity of the stacker cylinder is 10 ~ 110cSt (1.8 ~ 15E), ISO VG46 hydraulic oil. The normal working oil temperature is 10 ~ 70℃, and the ambient temperature is in the range of -20 ~ 80℃. When the ambient temperature and service temperature are low, the hydraulic oil with lower viscosity can be selected.

The "O" ring can be used as an auxiliary seal inside the stacker cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the stacker cylinder, and can be completely sealed.

Before purchasing the stacker cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

Answers to some questions about stacker cylinder:

What size of hydraulic cylinder is needed for 200 tons pressure? The pressure of the cylinder at work is determined by the load, and the pressure of the physical force is equal to the force divided by the area of action (that is, P=F/S). If you want to calculate the output force of the cylinder, you can calculate by the formula: Set the radius of the piston (that is, the cylinder) is R (unit mm) the radius of the piston rod is r (unit mm) the pressure level P (unit MPa) when working, then the thrust of the cylinder F push =3.14*R*R*P (unit N) the pull of the cylinder F pull =3.14* (R* R-R *R) *P (unit N) 100 tons of the cylinder, System pressure 16Mpa.

Why does the cylinder pop out of itself when it stops?
This situation has two possibilities, 1. There is more air in the system, so exhaust the gas. 2. The back pressure of the oil return is relatively large, check the oil return filter, check whether the cylinder has a rod cavity buffer is too tight, and choose a 3-position 4-way M-type valve for the reversing valve. In addition, after the shutdown, manually change the reversing valve back and forth several times, it should not rise out.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
五月婷婷六月丁香综合小说| 日本日本乱码伦视频免费| 日产国产精品久久久久久| 欧美成人伦理在线播放| 久久久久亚洲av毛片大| 亚洲欧洲日韩综合网站| 欧美日韩精品免费一级| 欧美国产日韩精品77上位| 豆国产98在线观看亚洲| 一区二区三区欧美激情| 亚洲1区2区3区av| 中文字幕一区二区三区免费看| 9色国产精品一区粉嫩| 九色九九综合久久爱| 日韩特黄特刺激午夜毛片| 欧美成人3p视频在线观看| 亚洲男人天堂成人网| 哪里有免费黄色av| 欧美日本大陆一区二区| 91狠狠人妻久久久久久综合| 亚洲精品国产成人99久久6| 亚洲va久久噜噜噜久久| 欧美亚洲综合一区色婷婷| 日韩精品一区二区三区视频最新| 亚洲欧美日韩国产精品专区| 在线电影日韩一区二区三区| 亚洲精品日韩在线丰满| 中文字幕人妻女同一区| 国内精品国产三级国产av万事达| 精品国产日本一区二区| 欧美一级黄片在线播放| 日韩欧美亚洲精品成人| 亚洲成人久久久久久久| 天天干天天射天天日天天操| 国内自拍2019在线| 欧美日韩国产成人ggg| 日韩亚洲欧美综合在线| 国产精品青青青高清在线观看| 在线一区欧美日韩国产| 日韩专区精品无码资源首页| 99精品国产一区二区青青性色|